Philips Com

PHILIPS - 32PF 5320 [LCD PANEL REMOVAL] DISASSEMBLE PROCEDURE

DISASSEMBLY

1. Cautiously pull back the upper part of the anti-static copper
   foils next to left and right speakers. do this in such a way that the
   foils are no longer attached to the metal ground plate on which the SSB
   board is mounted.


2. Disconnect cables  form the "L" and "R" speakers.


3. Unplug the LVDS connector  on the LCD panel. Be careful. This is a very fragile connector. 


4. Unplug connections of the side I/O panel, the Top Control Panel, and the LCD panel on the SSB board


5. Unplug 520 & X530 connectors on the power supply board.
   Instead of X520 also connector 66B on the other end of flat cable can be
   unplugged. 


6. Lift the metal frame, together with all PCBs from the LCD panel.
    Take care not to damage fragile LVDS cable, the 66B connector, and the
   anti-static copper foils.  Take care of these too, when later
   re-assembling the TV set, and replacing the copper foil.


7. After removal of the metal frame, you can lift the LCD dispay from plastic frame.  


8. If the plastic frame is damaged, replace it by a new frame, after
   removing speakers, the side I/O panel, the top control panel, and LED
   panel.

RE- ASSEMBLY

To reassemble the whole set, execute all process in reverse order.
 While re-assembling, make sure that all cables are placed and connected
in their original positions.  Also make sure that the antistatic copper
foils are not damaged, and they make good electrical contact with the
metal frame.  Be careful with the fragile LVDS cable.