SKYWORTH Android 4K Update Method

FIRMWARE Buy Now With QR Code Software Cost 1000 PKR

Steps How to Update 4K Skyworth Android TV:

Buy Skyworth Software 7.00 Version and 8.00 Version Whatsapp +923139292880

Steps How to Update 4K Skyworth Android TV:

1. Format the USB to FAT32;


2. Copy the file named”upgrade_loader_common-file.pkg”(Around 600MB-800MB）into the root of the USB flash drive.


3. Unplug the Skyworth 4K Android TV from the power source.


4. Insert the USB Flash Drive that contain the software to USB 2.0 Port at the back of Skyworth Android 4K TV.


5. Turn on the Android TV using the TV original remote control.


6. The upgrade start, TV boot up and logo showing stack on the screen for a while during the upgrade, It will take around 5 minutes.


7. Then the Android TV will automatically restarts, and restart again after an around 5 minutes.


8. Then it will come to the TV setting.


9. Press “source 3 1 9 5” to enter into the factory menu, and check the software version.


10. Select General Setting->Out Factory Reset function.


11. Finish.(To avoid the Android TV to upgrade again, better remove the USB or delete the software in the USB)

Remark: Above process takes around 14 minutes.

PQ/PANEL Data upgrade process

Copy the files in an empty USB Flash Disk and insert the USB Flash disk into the USB2.0 on the TV.

On your original skyworth remote press the key of ‘source’ to enter source menu and press the key of’3”1”9”5′ continuously to enter the factory general settings menu, you will see the UI as follows:

Go to and choose ‘General settings’ you will enter the UI as follows:

Choose ‘Overseas Settings’ you will enter the UI as follows:

choose ‘Update PQ; and ‘Upate Panel’ to upate PQ and Panel(Optional). When you see ‘Success’ on the TV means update success.

After you update PQ and Panel successfully. Please remove the AC cord and restart TV.

Please refer to step 2 to enter the factory menu and choose ‘General settings’ again.

Please choose ‘Restore Default Menus’ and press ‘ok’.

Please refer to step 2 to enter the factory menu and choose ‘General settings’ again.

Please choose ‘Factory Reset’ and Press OK，then TV will reset.

Skyworth 4K Android Version 7.0.0 is available to download using the following link below. Take note this software is coming directly from the Skyworth Head Quarter in China.

Even the instructions on how to update the TV is also from them. I just translate it to English to understand by none Chinese speakers.

Buy Software 7.00 Version and 8.00 Version 

Whatsapp +923139292880